Author Topic: Factory reset of the Aero Detector  (Read 877 times)

Offline Wally

  • Newbie
  • *
  • Posts: 1
Factory reset of the Aero Detector
« on: August 01, 2016, 11:09:21 am »
This will reset the detector to factory default settings (to IP address 192.168.20.211)

With the FPD off:
Hold down the power button until you get a solid green.
As soon as you get the solid green, finger off the power button, and hold down the select button.

Keep holding the select button.

When all three lights blink, while still holding the select button, also hold down the power button.
The three lights will blink for maybe 10 seconds, then go solid for a second.
Once the green power button is on solid - and the other two lights goes off - your done.
You can take your fingers off the buttons.